Category: Anti Seize
TYPICAL PROPERTIES | CHROME ANTI-SEIZE |
Consistency | NLGI No. 2 |
Penetration (1/10mm at 25°C, 60x) ASTM D217 | 275 |
Penetration change (10 000 x) | 35 |
Dropping point | None |
Timken OK load, kg (ASTM D2509) | >25 |
Copper corrosion test (ASTM D130) | 1b |
Base oil viscosity at 40°C, cSt (Brookfield) | 100 |
Max operating temperature as thread/anti-seize lubricant | 1 500°C |
Key metallic component | Chrome |
Colour | Silver |
Exceeds requirements of MIL-A-907E (US Military Spec) | Yes |
Average torque to loosen threaded connection after being subject to: | |
565°C | 55Nm |
1 100°C | 175Nm |
Co-efficient of friction at 200N | 0.130 |
Compliance with latest First World Environmental Legislation | Yes |
Resistance to contact with Ammonia | Good |
Resistance to Electrolytic Galvanic Corrosion | Good |
Suitable for use on Austenitic/Stainless Steels | Yes |
High load, slow-moving lubricating properties | No |
Protection against corrosion of battery terminals | OK |
Apply to back of disc pads to eliminate squeal | No |
Contents of aerosol packs | 350 ml |
Packing in tubes | No |
Other packs (500g, 5kg, 15kg, 50kg & 180kg) | Yes |
Please Leave Your Product Enquiry Here. We will Get Back To You Soon.